Metalized Laminating Film with EVA Glue


Surface layer: PET
Glue layer: EVA adhesive


Thickness: 24mic
Width: 300~1500mm
Length: two hundred~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Considerably less than 2

*method parameter:

Equipment for thermal film: Dry and moist movie laminator
Lamination temperature: 95~105c
Roller force: ten-20mpa
Speed: 8-20 m/min

*instructions for utilizing BOPP thermal laminating film:

Regular procedure temperature is 90c-105c, roller force and temperature range with diverse types of paper, ink and EPTs.
When making use of the movie for the 1st time or do other treatment, attempt a tiny volume before mass laminating.
Make confident the ink is dry before laminating. It will delaminate when the paper is made up of too a lot humidity and powder.
Make confident put the content in a lower-temperature, dry place.


Metalized Laminating Film with EVA Glue

Metalized Laminating Film with EVA Glue