BOPP Velvet Matte Thermal Laminating Film-Smooth Touch

*Material

Floor layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 30mic
Width: 300~1800mm
Duration: two hundred~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(three inches)
Bonding: Significantly less than 2

*procedure parameter:

Gear for thermal film: Dry and damp film laminator
Lamination temperature: 95~105c
Roller force: 10-20mpa
Velocity: 8-twenty m/min

*directions for employing BOPP thermal laminating film:

Typical process temperature is 90c-105c, roller force and temperature differ with distinct varieties of paper, ink and EPTs.
When making use of the film for the very first time or do other remedy, attempt a tiny volume just before mass laminating.
Make positive the ink is dry prior to laminating. It will delaminate when the paper contains way too much moisture and powder.
Make confident set the content in a lower-temperature, dry area.

*EPT:

SPECIFICATION 35mic
VELVET MATT
THICKNESS (mic) Foundation 19
ADHESIVE 16
Total 35
WEIGEPT m2/kg 29.forty
kg/m2 .034
WIDTH(mm) 300mm-1800mm
Duration(m) 200m-3000m
PARER Main 25mm(1inch),58mm(two.25inches),76mm(3inches)
BONDING Much less THAN two

BOPP Velvet Matte Thermal Laminating Film-Smooth Touch

BOPP Velvet Matte Thermal Laminating Film-Smooth Touch